Setting Up and Using The Remote

Volume Punch Through

This sets Volume to work for one device in all modes.
For example, the TV volume will work in the cable and VCR modes.

1. PRESS the device, (TV, VCR, CABLE, etc.), button - RELEASE
2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
3. PRESS 9 - 9 - 3.
4. PRESS the device key you would like the volume to come from.
5. Two blinks.

NOTE #1: This only sets volume in the TV, VCR, CABLE, or SAT mode.
NOTE #2: On some remotes (such as the 15-1994), you can only punch the volume though to the TV, this was fixed on newer remotes (such as the Cinema 7) Remember, if the volume punch through doesn't meet your needs, you can always program the volume controls using KEY MOVES. For instance, if you want the volume controls in CD mode to work your amplifier which is on the AUX button, then you would use the 994 command and move the 3 volume controls from AUX to CD. See the KEY MOVES section for more info.